Brake Laser Safety Device - List of Manufacturers, Suppliers, Companies and Products

Laser Safety Device for Press Brake 'DSP-J'

Demonstrating effectiveness in safety measures for press brakes! Protecting workers from dangers during processing operations.

The laser safety device 'DSP-J' for press brakes was developed to protect operators from hazards during processing work with press brakes. The laser light emitted from the projector reaches the laser detection point of the receiver, creating protective areas in the front detection zone and the central detection zone, thereby safeguarding the operator's fingers in these two detection areas. Additionally, by selecting between the two operating modes (1 and 2) on the operation box, processing work can be carried out smoothly. (Please refer to the detailed features section for more information.) 【Features】 ■ Two modes for different bending tasks: Mode 1: Full use mode for front and central zones Mode 2: Front zone release mode (used during box bending) ■ Easy movement during die changes ■ Deactivated at low closing speed (10mm/s) ■ Reasonably priced ■ Ministry of Labor Certification Number: TA501 *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイイチテクノス本社
Price：Other

Safety Sensors
Other safety equipment
Safety Controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Laser Safety Device for Press Brake 'DSP-AP-MCS'

Protect workers from dangers during processing operations, ensuring both safety and productivity!

The laser safety device for press brakes, 'DSP-AP-MCS', consists of the MCS control unit for operating and monitoring the system, the TX projector that emits a 'beam of laser light', and the RX receiver with nine light reception points. When the visible laser light directed at the reception points of the receiver is obstructed, the press brake stops. It allows for smooth operations such as box bending and flat bending in three different operating modes. 【Features】 ■ Improved work efficiency!! Work can be performed without reducing production efficiency. ■ Enhanced safety. ■ Compatible with various workpieces such as box bending!! Three modes can be utilized. ■ Easy adjustment of the optical axis and movement during die changes. ■ Resistant to vibrations with a special laser! ■ Smooth operation possible with automatic plate thickness detection! ■ Ministry of Health, Labour and Welfare certification number: TA569 *For more details, please refer to the PDF materials or feel free to contact us.

Company：ダイイチテクノス本社
Price：Other

Safety Sensors
Other safety equipment
Safety Controller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DSP-AP Laser Safety Device for Press Brake

Laser safety device DSP-AP for press brakes. Balancing safety and productivity! Ministry of Health, Labour and Welfare certification number TA569.

■Work can be performed without reducing production efficiency In conventional safety devices, there was a tendency for work efficiency to decrease. With the DSP-AP, high-speed descent is possible up to a position of 2mm above the material plate, achieving high productivity. Additionally, since high-speed descent is possible up to a position of 2mm above the material plate, the range of high-speed monitoring has expanded, resulting in improved safety compared to conventional methods. ■Smooth operation with automatic plate thickness detection function In conventional safety devices, the upper die would sometimes stop. The DSP-AP, with its material detection function, can perform bending at the appropriate pressure point even if the material discharged from the roll machine is warped or has distortions. Furthermore, due to the planar laser projection, adjusting the optical axis and moving during mold changes is easy. ■Supports various workpieces such as box bending Mode 1: All zones active Mode 2: Central zone active mode (used during box bending) Mode 3: Front and central zone active mode In normal mode, even box bending work that would block the optical axis at the front can be processed in box bending mode, where only the center optical axis is active. Additionally, even if the system stops due to shading, processing can continue by re-pressing the operation foot switch to deactivate the optical axis. (Re-pressing processing)

Company：小森安全機研究所
Price：Other

Area Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Laser safety device, compatible with Murata Machinery's press brakes.

Setting the table height, thickness of the board, and other adjustments is easy! It greatly enhances the safety of the operator and work efficiency.

We would like to introduce products suitable for safety measures for press brakes that we handle. Starting with the easy-to-set safety device for press brakes, "DSP-J," which has a scale, we also offer the movable material follow device "UP Followers." 【DSP-J Features】 ■ Easy to set with a scale ■ The laser beam shape is wide, making optical axis alignment easy ■ Compatible with upward-moving lower dies (Amada RG type) ■ Laser disabled during slow speed and upward movement ■ Capable of box bending 【UP Followers Features】 ■ Prevents accidents caused by unexpected workpiece lifting during bending operations, allowing operators to work safely ■ Can be installed on various press brakes, excluding upward-moving lower die press brakes, with a maximum load capacity of 200kg ■ Large sheet processing that requires two people can be done by one person ■ Reduces operator fatigue, shortens working time, significantly increases productivity, and enables cost reduction ■ Operates in sync with the movement of the press brake using a linear scale, requiring only the initial input of plate thickness without the need for detailed settings ■ If linear scale installation and other preparations are done in advance, it can be used with multiple machines with one set *For more details, please feel free to contact us.